Page 114 of 191
800581-2.11 NeurOne System User Manual.doc
5.8.1 Core - System settings
This subtab is divided into four subsections:
Measurement System
In the Measurement System section, there is selection for the active
measurement system. As default
NeurOne
is selected.
Manage
r… button opens the control that allows the user to establish and test
the data connection with the NeurOne device, control calibration information of
the Amplifiers, update the firmware of the Main Unit and the Amplifiers and
create new filters. By pressing Shit-
key simultaneously with Manager… button
grid view style NeurOner manager is opened. See more in the following chapter
5.8.1.1 NeurOne manager.
NeurOne section has also controls tabs for trigger inputs A, B, 8-bit trigger,
Amplifier Muting. An incoming trigger launches a trigger out pulse if trigger out is
allowed in PC Software. Duration of the output pulse is adjustable in the
software.
When using NeurOne trigger A or B, you define the incoming
trigger type in system settings and allow/select triggers also in
Protocol.
