Notice
Before filling in the water, please make sure all the components are
installed correctly. To prevent any leakage which may damage the PC
components, please perform a 24-hour leaking test with only the pump
connected to the power supply.
Bitspower reserves the right to change the product design and
interpretations. These are subject to change without notice. Product
colors and accessories are based on the actual product.
When using leak tester on water cooling loop, in order to avoid product
damage due to excessive pressure, the input pressure should not exceed
0.5kg/cm
2
(Bar). If the product is damaged due to
excessive pressure, it will be borne by the customer. Forbidden to use the
leak teser when there is water in the loop or the pump is runing.
Bitspower requires to use of distilled or pure water or Bitspower Pellucid
Coolant as the water-cooling liquid. Also, the consumer can add Bitspower
Dye to Pellucid Coolant for the color requirement. But please do not add
any biocide by yourself. If the consumer chooses different water-cooling
liquids, the resulting impurities may cause peeling off the coating on some
of the hardware, water channels blockage by built-up residue, improper
operation of the water pump, water tank tube breakage, and O-rings
deformation or loss sealing leading to leakage. Any issues related to the
use of inappropriate water-cooling liquid will be the responsibility of the
consumer.
[ 3 ]
記得上角要放對應的 LOGO!