3.
Click the
(Browse)
button and navigate to the upgrade file. Select the upgrade file, then click
Flash
image
. A message appears notifying you if the AntMiner S9 firmware can be upgraded and if yes, will then
proceed to flash the image.
4.
When the upgrade is completed, the following message appears:
5.
Click one of the following options:
■
Reboot
- to restart the miner with the new firmware.
■
Go Back
- to continue mining with the current firmware. The miner will load the new firmware next
time it is restarted.
6.3 Modifying Your Password
To change your login password:
1.
In
System
, click the
Administration
tab.
2.
Set your new password, then click
Save & Apply
.
6.4 Restoring Initial Settings
To restore your initial settings
1.
Turn on the miner and let it run for 5 minutes.
2.
On the controller front panel, press and hold the
Reset
button for 10 seconds.
Resetting your miner will reboot it and restore its default settings. The red LED will automatically
flash once every 15 seconds if the reset is operated successfully.
AntMiner S9 Installation Guide
6. Administering Your Miner
- 15 -
