5. Monitoring Your Miner
To check the operating status of your miner:
1.
Click
Miner Status
.
2.
Under AntMiner, monitor your miner according to the descriptions in the following table:
Option
Description
ASIC#
Number of chips detected in the chain.
Frequency
ASIC frequency setting.
GH/S(RT)
Hash rate of each hash board ( GH/s)
Temp(PCB)
Temperature of each hash board (°C).
Temp(Chip)
Temperature of the chips on each hash board (°C).
ASIC status
One of the following statuses will appear:
●
O
- indicates OK
●
X
- indicates error
●
-
- indicates dead
AntMiner S9 Installation Guide
5. Monitoring Your Miner
- 13 -
