AntMiner Manual
Last updated: 4/14/2014
Page 7 of 9
Page7 / 9
Hash rate: 1255.82 GH/s, average speed every one minute.
Temperature: the maximum value among all collected data.
4.3
LED and beep
4.3.1 When the miner is running well, green LED flashing with 1 second interval. If network is off
for more than one minute, Green LED will be off and beeper rings.
4.3.2 Red LED is Fault alert, which keep off when miner is running well. When the temperature is
higher than 80 Degree Celsius and some fans are spinning up, red LED flashing with 1 second
interval; when the temperature is higher than 80 Degree Celsius and all fans are not spinning up,
red LED keep lighting and beeper rings.
5
System Configuration and Status
5.1
System Upgrading
Through ‘System->Upgrade’ you will be able to upgrade your miner.
‘Keep setting’ is chosen by default, you should choose it if you hope to preserve the current
settings. You should cancel this option if you hope to restore to initial settings.
Click ‘Browse’ button to choose upgrade file. After choosing upgrade file, then click ’Flash image...’
button, it will remind when upgrading software, start to download software after choosing
upgrading software. During the upgrade process, you need to
wait patiently, and must keep
power on, otherwise, AntMiner should be shipped to factory to restore.
You will see bellow
screenshot after upgrading successfully.
