6
Steam ‘n Clean leaves windows and mirrors sparkling clean.
Although glass appears to be a hard, smooth surface, it actually
has an uneven surface which traps and holds dirt. Chemical
glass cleaners can leave a residue which attracts airborne
grease and grime to make windows look dirty faster. Steam ‘n
Clean dissolves deep down dirt and leaves no residue.
1. Fill the Water Tank with cool tap water or distilled/
demineralized water.
2. Connect the C.I.D. plug to an appropriate outlet.
3. When green indicator light glows, slide Safety Lock back to
activate Steam Switch. Press switch to release steam. Steam
continues to come out of the tool while switch is pressed.
4. Spread steam evenly over glass.
5. Clean with scrubber side of glass tool.
6. Wipe surface with squeegee side of tool, then finish with a
clean, dry cloth.
Cleaning glass surfaces
C A U T I O N :
Thermal shock can shatter
glass. Before cleaning cold
glass surfaces, carefully
warm the surface by
directing the steam jet on
the glass from a distance
of no less than 4 - 6”.
Steam cleaning hard surfaces
Warm
100°F
Clean
130°F
Sanitize
160°F
Salmonella
E. coli &
Dust Mites
HOT!
200°F
3”
2”
4”
All living areas
Stubborn soil that resists traditional hot water, cleaning
solutions and vigorous scrubbing can often be effectively
removed with high temperature steam. Baked-on-grease
on the stovetop, dried fruit juice in the refrigerator, mildew
or stubborn soap scum on sliding shower doors, gum on
countertops — steam makes all these far easier to clean.
Use your Steam ‘n Clean to soften and remove stubborn dirt,
grime, dry, hardened food, and other household soil from hard
surfaces. You can also use your steam cleaner to clean and
sanitize pet cages.
*
*NOTE: Always remove pets before cleaning.
1. Fill the Water Tank with cool tap water or distilled/
demineralized water.
2. Connect the C.I.D. plug to an appropriate outlet.
3. Attach tool. For large surface sanitizing, such as
c o u n t e r t o p s , basins and sinks, use the 2-Position
Steam Applicator. For smaller areas, use the Steam Jet
with/without the Steam Brush.
4. When green indicator light glows, slide Safety Lock
back and press Steam Switch to release steam.
Steam continues to come out of the tool while
switch is pressed.
5. Wipe surface with a clean, dry cloth.
