BISSELL.com
3
Assembly
Go to
support.BISSELL.com
for assembly videos.
1.
Insert handle into body of
machine until it clicks into
place.
2.
Align clean water tank with
the grooves on the back of the
machine and slide it until it
clicks into place.
3.
Wrap the cord around the
Quick Release™ Cord Wrap and
the lower cord wrap.
Note:
To easily unwrap the
cord, turn the Quick Release
Cord Wrap down to remove
the cord.
Changing the Brush Roll
FreshStart™ Multi-
Surface Brush Roll
Maintain freshness of the
brush roll while removing
tough, sticky messes and
picking up dry debris.
Wood Floor Brush Roll
Gently clean sealed hard
floors.
Area Rug Brush Roll
Pick up dry debris and
pet hair.
FreshStart PET
Multi-Surface Brush Roll
Maintain freshness of the
brush roll while removing
tough, sticky messes and
picking up pet hair and
dry debris.
4.
Grab the front of the brush
window and pull upward to
remove.
5.
Remove the brush roll by by
pulling the tab.
6.
Reinstall by placing the end
of the brush into the right side
of the foot.
7.
Press the tab of the brush
down so it locks into place.
8.
Replace the brush roll
window by lining up tabs on
the edges of the foot.
9.
Press the window back so it
clicks into place.
