Bissell Cleanview Passive Manual Download Page 1

Page: 1 / 5

Updated by A. Lentz 10/8/2021P:\Customer Service Dept\Knowledge Base\Troubleshooting\TROUBLESHOOTING GUIDES NEW

MODELS\VACUUM\Troubleshooting 1994F\1994F No or Low Suction.docx

Detach hose from base of canister by pushing on release tab and pulling out.

Detach hose from extension wand by grasping each piece and pulling them

apart. Do the same to detach the foot.

Low or No Suction

Cleanview Passive

1994F

Summary of Contents for Cleanview Passive

Page 1: ...DES NEW MODELS VACUUM Troubleshooting 1994F 1994F No or Low Suction docx 1 Detach hose from base of canister by pushing on release tab and pulling out 2 Detach hose from extension wand by grasping each piece and pulling them apart Do the same to detach the foot Low or No Suction Cleanview Passive 1994F ...

Page 4: ...1994F No or Low Suction docx 15 Do the same to connect inner and outer cyclone pieces Reinsert pieces into dirt tank Filter should sit level NOTE filter will not sit level if tabs on front are not aligned 16 Reattach top lid to dirt tank by aligning clear notch with slot on top lid Clear notch should point towards unlocked Twist clockwise to lock ...

Page 5: ...ing TROUBLESHOOTING GUIDES NEW MODELS VACUUM Troubleshooting 1994F 1994F No or Low Suction docx 17 Reattach dirt tank to canister and turn on If the machine still has no or low suction BISSELL Consumer Care please refer to product changeover guide External Support Contact BISSELL ...