Protective glasses or a shield should always be used when operating,adjusting or repairing the appli-
ance.
Do not put your hands and legs near the rotating parts.keep a safe distance from the eject hole.
Be extremely careful when running over or removing snow off brash entrances,footpaths and paths.Be
prepared for unexpected risks or moving vehicles.
When you hit a foreign items,switch the engine off,disconnect the cable from the spark plug and check
thoroughly the machine for any damage and remove it if necessary
–
the machine can be put into oper-
ation again and worked with now.
If the appliance starts abnormally vibrating,switch the engine off and search for the cause immediate-
ly.Generally,vibrations are a warning against operating failure.
Switch the engine off every time you stop operating the appliance,clean the working screw/rotor can/eject
tube and when executing repairs,adjusting and inspecting the appliance.
When cleaning,repairing and checking the appliance,make sure that the working screw/rotor and all
moving parts are stopped.
Never use the appliance inside rooms,to be used outdoors only.
Do not overload the appliance.
Disconnect the working screw/rotor drive when the machine is to be transported or when not being used.
The machine must only be used when appropriate visibility or good lighting is provided.Stand fast on the
ground and hold the handle tight by hands at all times.walk,never run.
Do not allow anybody to stand on the appliance.
Switch the engine off and unplug it if you are not working with the appliance or when leaving the appli-
ance or adjusting,maintaining or repairing it.
The appliance should only be used when in a perfect state.Carry out a visual inspection before switching
the appliance on.Check especially the safety equipment,electrical control elements,power lines and
screw couplings for any damage and if they are tightened appropriately.Replace any damaged parts
before the appliance is put into operation if necessary.
Put the appliance out of operation and store it in a closed room only after the engine has cooled down.
The engine must necessarily be filled with engine oil before being put into operation for the first time.
Check the oil level whenever the appliance is to be put into operation.Add engine oil if necessary.
Never store the appliance with petrol in the tank inside a building where petrol fumes may potentially get
in touch with open fire or sparks.
When the appliance is not going to be used for a long time,store it with an empty tank.
Do not change the controlled engine setting and do not rev the engine up.
Machine-specific safety instructions
Mechanical residual risks
Knife movement
Do not connect the drive for the extension devices before you are ready,by this,you will prevent uninten-
tional and dangerous start of the knives.
Danger !
If you should move the knives with the drive not being connected,immediately stop using
the machine and contact an authorized service centre.
www
www.italias
.italiastar
tar.r
.ro
o
in
inffo@italiastar
.ro
o
004/
004/021.433.
021.433.03.27
03.27
Italia Star Com Due S.R.L.
Italia Star Com Due S.R.L.
86
