Chapter2 Main function of tiller
Ⅰ
Rotary tillage:
Rotary tillage components are installed on both sides of the driving shaft of tiller
running gear. Tighten the shaft with two bolts M
8
×55. Then the tiller can work.
(Look at table2 and Picture2). Table 2
Tilling device mode
3groups
5groups
3blades
4blades
4blades
Tilling blades
3
×6
4×6
4×8
Tilling scope(mm)
800
1350
Suitable soil
Paddy field with
insufficient water;
clayed soil
solid soil
Dry soil
Picture2:
tilling device
Picture3:
ditching device
Ⅱ
Ditching and ridge forming
Take away shift lever, install ditching device and adjust the width and height of
ditching device. (Picture3)
Ⅲ
Short distance transportation
Install forearm of tiller case
on the drag body and wheels on the driving shaft.
The rated load is 250kg. At the rated speed of gasoline engine, fast shift speed is
about 10km/h and slow shift speed is 5km/h.
Ⅳ
Multifunctional work
Take away the safety cover of gear box (num.2 in picture 1), and the back bolt of
main shaft, the
key sleeve of the shaft, then install the attaching belt pulley and
coupling on the main shaft of gear box and fasten with bolts. Ordinary V-belt
A-model is used for the cross section of belt pulley. The rated speed of belt
pulley is 3600r/m. When it is attached with relative machine tools, auxiliary
tools, you can carry out such multifunctional work: bailing, sprinkling, chemical
spraying, threshing, reaping and generating power.
www.italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
95
