1
—— Instruction Manual ——
VB25FL
Drill In Floor Anchor For Use In Floating Wooden Floors
Date:
8/9/18
Rev:
5
B.A. N.J.C. File:
\ I:\Publisher\Instructions\volleyball
Ref#: 960971
Customer Service
(800) 247-7668
INSTALLATION OPTION USING EXPANDING CONCRETE ANCHORS
IMPORTANT NOTE:
1. Pilot drill a 7/8” diameter hole through floor structure. Then use a 7/8” carbide tipped drill to extend the hole at least 2 9/16” into
the concrete.
2. Open up hole in floor structure to 1 1/2” diameter, then route a hole 2 3/4” diameter by 3/8” deep at the top for the threaded
insert. Use caution so that the top of the insert is not below the floor level. If possible, route the hole at least 1/16” diameter
