1
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
2
Pickleball Post
D
2
BM21 Floor Socket (optional)
B
1
Pickleball Net
E
2
BM300A, BM350A or BM400A Post Adapter (optional)
C
1
Center Net Hold Down
Inspect all contents prior to installation. Report any missing parts to dealer immediately
.
Read all instructions before proceeding.
—— Instruction Manual ——
PK10
Official Pickleball System
Date: 12/12/2016 Rev: I.R. B.A. N.J.C. File: \pub\pk10uinst Ref#: 960902
Customer Service
(800) 247-7668
1.
For permanent installation dig 8" diameter holes 36" deep and 22
feet apart. Make sure the top of
Pickleball Posts
(A) are 36" above
the playing surface, net tie loops square to the playing surface and
the
Pickleball Posts
(A) are level. Fill hole with concrete. See
Figure 1, 3 and Pickleball Court Diagram on the back page.
2. Purchase
optional
BM21 Floor Sockets
(D) for removable
Pickleball Post
(A) installation. Dig 8" diameter holes 36" deep and
22 feet apart, fill with concrete. Insert
BM21 Floor Sockets
(D) into
the wet concrete. Make sure
BM21 Floor Sockets
(D) are square
and flush to the playing surface. Make sure to keep wet concrete out
of
the
BM21 Floor Socket
(D). Use the bottom adjustment pad to
achieve
36"
Pickleball Post
(A) height. See Figure 2, 3 and
Pickleball Court Diagram on the back page.
3. Use
BM300A, BM350A or BM400A Post Adapters
(E) (not shown)
to set up a pickleball court on an existing indoor volleyball court
with existing volleyball post sockets.
BM300A, BM350A or
BM400A Post Adapters
(E) are available for 3", 3 1/2" or 4"
sockets.
4.
Run both ends of the top rope of
Pickleball Net
(B) through the
groove in the top of
Pickleball Post
(A) and tie off each end on the
net tie loops. Tie off the bottom of
Pickleball Net
(B) on the bottom
net tie loops. (B). See Figure 3.
4. Clip
Center Net Hold Down
(C) to the bottom center of
Pickleball
Net
(B) and adjust until the center of
Pickleball Net
(B) measures
34" from the playing surface. See Figure 3.
Figure 1
Figure 2
8"
36"
