1
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
1
180 Degree Breakaway Goal
B
1
Cover Plate (Installed)
C
2
8-32 X 3/16” Round Head (Installed)
Phillips Machine Screw
D
2
Nylon Net Tie
E
1
1/4” Long Arm Hex Key
F
1
Anti Whip Net
G
2
Release Pressure Adjustment Screws (Installed)
H
1
Goal Hardware Bag
Warning!!!
The Vertical Assembly Bolt is under Extreme Spring Pressure! Do Not Adjust or Remove!
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
—— Instruction Manual ——
180
DEGREE
BREAKAWAY
GOAL
1.
Remove the two
8-32 Machine Screws
(C) and remove
Cover Plate
(B). Mount the
180 Degree Goal
(A) to backboard with the hardware provided in the
Goal Hardware Bag
(H). Make sure the Goal is
level then tighten hardware. See Figure 1.
Date: 10/26/04 Rev: 1 B.A. N.J.C. File: \drive.f\pub\inst\180breakaway Ref#: 910184
Figure 1
