1
————— Instruction Manual —————
M
ODEL
BA79K
Adjustable Playground Pole System
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
1
H-Frame
**L
1
5/8’ x 8” Hex Bolt / 5/8” x 9” Hex Bolt
B
1
Extension Arm
M
2
5/8” Lock Nut
C
1
I-Rod
N
2
5/8” x 6 1/2” Hex Bolt
D
1
“J” Bolt template
O
1
1/2” x 4” Hex Bolt
E
1
Vertical Pole
P
4
1/2” Lock Nut
F
1
Hand Crank
Q
3
1/2” x 5” Hex Bolt
G
4
“J” Bolt
R
1
Spring Assist
H
4
36” Rebar
S
1
Height Indicator Label
I
12
5/8” Hex Nut
*T
1
1/2”-13 x 2” Hex Bolt / 1/2” Lock Nut
J
8
5/8” Flat Washer
U
4
Safety Cap
Note:
* refers to factory installed hardware; ** refers to hardware included with H-Frame
K
4
5/8” Lock Washer
Warning!
Do Not Mount Pole to Existing Concrete Surfaces!
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
Warning!
Young players are at risk when they slam dunk on popular lowered height basketball systems.
See your dealer for information on Safety Nets.
Date: 02/10/10 Rev: 8 B.A. N.J.C. File: BA79k.mp; 79kinst.dwg Ref#: 920192
Customer Service
(800) 247-7668
1. Select the location for the concrete base footing using the Application chart to maximize hard playing
surface under and around the goal while minimizing interference with driveway traffic when unit is
adjusted at the lowest position. See Figure A.
2. Dig a minimum 20" diameter hole 48" deep. Be sure to bell out the bottom 12" of the hole at least an
additional 4" in diameter. A larger diameter hole will always be better than one not big enough.
See Figure A.
Note
:
Center of template/concrete foundation should be a minimum of 22" from any wall, fence, etc. to avoid
interference with adjusting crank on the back side of the pole.
