18
7-6. Lowering Operation
Perform lowering operation while constantly verifying horizontal level of the vehicle.
Stop the lowering operation in an unlikely event the lift tilts and as a result also the vehicle, then
carefully perform the lifting operation to bring the lift to the horizontal position and then try the lowering
operation again.
If such incident occurs frequently, there may be malfunction. Contact the lift supplier for consultation.
The lift starts to lower when the lift lowering button on the operation switch is pressed. Stop the switch
operation once the vehicle reaches the desired height for stopping.
7-7. Vehicle Exit
Exit the vehicle slowly only after lowering the supporter to the lowest position.
<Using sliding supporters>
Stop the vehicle once after wheels are off the supporters, then store the sliding part, then lower the lift
to the lowest position.
Never stand under the vehicle while operating the lift.
* Lowering the lift with transmission jack, rod or the like for removing or installing parts still
attached to the vehicle is prohibited. The supporter setting may become dislodged and the
vehicle can potentially fall.
* Do not place a foot under a supporter. Foot may become trapped and result in serious injury.
* In the event the lift does not lower even when the lowering button on the operation switch is
pressed, raise it once and then try lowering it again.
* Do not leave the lift with a vehicle lowered midway unattended for long periods of time. A
vehicle left on the lift at a low position without engaging lowering stop hook may potentially
cause the vehicle to be lowered and damaged.
*
Verify that the lift has been lowered to the lowest position. The supporters suspended
midway may potentially lead to damage of the vehicle or the lift.
*
Not having the sliding parts stored may potentially lead to damage of the vehicle or the lift.
Caution
Danger
Warning
Caution
