15
7. Operation Instruction
7-1. Preparation for Vehicle Entry
*
Supported models: Light to ordinary passenger vehicles, recreational
vehicles and small trucks (excluding long-body vehicles).
Lower the lift to the lowest position and store swing arms in arm supports. Remove any tools and parts
that are in the vicinity of the lift or on path of entry for the vehicle. The frame attachment, furthermore, is
protruded above the floor surface. Remove it if it gets in the way.
7-2. Vehicle Entry
Drive carefully the vehicle onto the center of the lift and stop the vehicle so that the center of gravity of
the vehicle is within the range specified on the lateral surface of the supporter.
7-3. Set Up Lifting Point
Supporters and swing arms may collide with the vehicle and may potentially damage the vehicle
or the lift if the lift is not lowered to the lowest position with swing arms stored.
Set the center of gravity of the vehicle to within the range specified with yellow color on the
supporter. The vehicle may potentially fall while the lift is raised or lowered, or due to vibration
arising from operating lift, as well as from detaching and attaching parts.
Drive the vehicle in carefully and do not start or stop the vehicle suddenly. Do not turn the
steering wheel while the vehicle is on the swing arms or frame attachments.
Doing so may potentially lead to damage of the vehicle or the lift.
* Securely set supporters on correct lifting points. Improper setting supporters can cause the
supporters to become dislodged and the vehicle may potentially fall.
* The partial lifting only on front or back, as well as on left or right is strictly prohibited.
Caution
Warning
Caution
Frame attachment
Swing arm
Warning
