BIS HSW, Owner'S Manual

Page: 18 / 45

18
2 99.01 kg G
3 1210.05 kg H
4 10.12 kg L
………………………….
----------------------
Sum 9876.10kg

print total result when M+/MC(←) is pressed

When Real Time Clock function is enabled
When indicator is set at “rtC.on”, date and time information will be included in the RS-232 data
stream:
When “Fn11” is set at “Ser.1”
2015/04/25 10:30:21 ST, NT, 100.01kg
2015/04/25 10:30:39 ST, NT, 210.00kg
When “Fn11” is set at “Ser.2”
2015/04/25 10:31:21
S/N WEIGHT UT
1 100.02 kg
2 99.01 kg
------------------------------------
Sum 199.03 kg
4.13 Printer Selection [Fn12]
Under this function, user can select the peripheral which the scale will be connected to.
a. Scale is off
b. Press and hold TARE(→) and press ON/OFF , display shows “Fn1”
c. Continue pressing TARE(→) until display shows “Fn12”
d. Press MODE(ENT) to enter, and display shows “PC2”
e. Press ZERO(↑) to select the following: “PC” for computer, “tEC” for Toshiba TEC printer, “ArGoX”
for Argox printer, “tSC” for TSC printer and “SH-24” for 24 columns Dot Matrix printer
f. Press MODE(ENT) to confirm and exit the current function, display shows “Fn14”
g. Press MODE(ENT) to enter the next function, or press ZERO(↑) to exit. When ZERO(↑) is
pressed, display will show “SAVE” if setting was changed, user can either press MODE(ENT) for
yes to save the changes made or press ZERO(↑) for not to save the changes.