EN
3
Quick start guide
This concise guide will help you get started with your Birth Alarm Mobile Premium/Lite and
it includes brief references to the comprehensive manual that can be downloaded from our
website
http://www.birthalarm.com
. These references take the following format:
“
(see
2.3)
”
First use (perform 1x after purchase):
1.
Unscrew the Birth Alarm Mobile Premium/Lite and remove the red
label from the pole of the battery. The batteries are now in contact
with the Birth Alarm Mobile Premium/Lite.
2.
Depending on your country of residence, the SIM card may have been
provided.
-
If this is the case, then the SIM card will already be inserted into
the SIM holder beneath the battery compartment.
(see 5.3)
-
If this is not the case, then you must purchase and set up the SIM
yourself
(see 6).
When you have done so, the SIM card must be
activated and slotted into the SIM holder.
(see 5.3)
Once you have performed these steps on your new Birth Alarm Mobile
Premium/Lite, you can reseal it with the screws and proceed with the set-
up.
Get started quickly
Programming:
1.
Take the Birth Alarm Mobile Premium/Lite out of the case and take hold
of the special screwdriver.
2.
Hold the rear end of the screwdriver against the red square next to the
symbol for a few seconds.
(see 3.2)
BW QUICKSTART.indd 3
15-02-2011 12:28:12
