55
5.
You can make a RS422 Daisy Chain multiple camera connection with RS422 standard serial port
controller.
PELCO P/D Keyboard RS485 Connection
NOTE: Use RS422 ports for RS485 connection. Only use TX+ and TX- for RS485 connection.
1.
Set RS422 control method on DIP switch.
2.
Set Baud Rate on DIP switch to the same as Baud Rate setting on the keyboard you are using.
3.
Set the camera ID on OSD menu by remote controller
4.
Reboot the camera by turning it Off/On after the DIP switch has been set up correctly.
5.
Use PELCO P/D compatible keyboard.
6.
Use preset 95# on the keyboard to bring up/exit camera OSD menu.
7.
Use joystick and Button “OPEN” or “CLOSE” to navigate OSD menu.
8.
To operate keyboard, please refer to the user manual of the keyboard you are using.
5. R –
4. R +
3. T –
2. T +
1. GND
VCC-CC45RS
RJ45 TO RS422/485
CONTROL CABLE ADAPTOR
5. R –
4. R +
3. T –
2. T +
1. GND
VCC-CC45RS
RJ45 TO RS422/485
CONTROL CABLE ADAPTOR
5. R –
4. R +
3. T –
2. T +
1. GND
VCC-CC45RS
RJ45 TO RS422/485
CONTROL CABLE ADAPTOR
RX +
RX –
TX +
TX –
GND
RS422
RS422 SERIAL PO
RT
ON CONTROLLER SID
E
Summary of Contents for NDI P200
Page 1: ...USER GUIDE NDI...
Page 65: ...WELCOME TO THE FUTURE...
Page 66: ...bird dog tv hello bi rd dog tv...
