Introduction
14
Trace Settings
The number of traces displayed and the minimum and maximum grid scale
values can be manually changed.
Note:
SiteHawk is capable of displaying up to 4 traces.
1.
Press the Trace name (e.g. Tr1) to select the active trace. See
.
Note:
The Trace name will be highlighted to indicate the active
Trace.
2.
Change one or both trace limits to change the grid scale for the trace:
Set the maximum value
a.
Press the maximum value to open the Top value dialog.
b.
Enter a maximum value.
Set the minimum value
a.
Press the minimum value to open the Bottom value dialog.
b.
Enter a minimum value.
3.
Trace Count Setting
a.
Press the Trace icon on the menu bar.
b.
Choose the number of traces to display x1, x2, or x4.
Note:
Every trace has a name: Tr1, Tr2, Tr3, or Tr4, the name can-
not be changed.
Figure
5
Tracing Settings
