BIRD SignalHawk SH-36S-RM-ASL, Operation Manual, Page: 40 / 195

26
User Interface Menus and Settings
In order to obtain the most accurate information possible, it is very important to use the proper
settings. The SignalHawk can be configured in various ways, allowing for a wide range of
measurement capabilities.
Getting Started with the SignalHawk
CAUTION
Spectrum Analyzer has a +20 dBm (100 mW) max. RF input. Exceeding the maximum input
will damage the SignalHawk. If unsure of power levels, measure the test connection with a
power sensor before using the SignalHawk.
Press the Power button to turn on the unit.
Setting Up
NOTE
For initial setup see Rack-Mount SignalHawk Set-Up or PC SignalHawk Set-Up .
This chapter describes SignalHawk menus, software settings, measurements, and adjustments.