BIRD SignalHawk SH-36S-RM-ASL, Operation Manual, Page: 114 / 195

PC/Rack Mount SignalHawk with ASL
100
5. Repeat Steps 2 through 4 until all of the desired frequency spans have been entered.
NOTE
If a mistake is made, the span can be edited or deleted. Individual sweeps cannot be
edited or deleted. Changes are made to the span and then the system will update the
sweeps automatically.
•
Change a span.
a. Select the appropriate span in the Span Table.
b. Change the settings.
c. Click on Update Selected Span.
•
Delete a span
Select the appropriate span in the Span Table.
Click on Delete Selected Span.
6. Click the OK button to save the changes.
NOTE
•
When you click on OK to save the new configuration file, you will be prompted to
create a new database. A new database must be created whenever a new
configuration file is created or when changes are made to an existing
configuration file. You cannot log data obtained from two different configuration
files into the same database.
•
Default location for saved configuration files is My Documents > PC SignalHawk >
ASL > My Configurations folder. Configuration files are saved as CSV files.
7. Create a new Database. See Create a Database .
Edit Configuration Files
NOTE
Editing CSV files in other programs is not recommended and can result in configuration files
that are incompatible with SignalHawk ASL.
1. Click on the Adv. Logging.
2. Click on Reload/Update Config. option on the Adv. Logging — Database/Configuration
Menu.
NOTE
If a database is currently attached, the Adv. Logging button will automatically enter the