SignalHawk™ PC and Rack Mount Models
73
Options Dialog Box (View>Options)
The Options dialog box contains six tabs - Scale, Units, Markers, Limits1, Limits
2, and Labels. Select a tab and enter or edit specific values for the currently
active graph.
Scale Tab
1.
Enter the x- and y- axis.
2.
Enter the y- axis offset.
3.
Do one of the following:
Select the Autoscale box.
Manually enter values for the scales.
Note:
The Offset setting for a specific trace is displayed. The
setting changes when the Trace changes.
Figure
59
Example, Scale Tab
Auto-
scale
Units Tab
1.
Select the units of measure for the y axis.
2.
Set the size of text for the entire graph.
3.
Set whether or not to display grid lines.
Figure
60
Example, Units Tab
Summary of Contents for SignalHawk SH-36S-PC
