RF Power Measurement
57
Data Graph Controls
Note:
Graph controls are located in the Sensor Operation Menu .
Pinch the graph to zoom in or zoom out.
Swipe up, down, left, or right to move the trace within the graph area.
Tap Reset Zoom on the Sensor Operation Menu to return the graph to
normal operation.
Graph Unit
The graph unit of measure may be changed manually by selecting a unit from
the menu.
Note:
Changing the graph unit will automatically change the scale
value.
1.
Tap the Sensor Operation Menu .
2.
Tap Graph Unit to display the dialog.
3.
Tap the radio button for the desired unit of measure.
Graph Scale
The graph scale on the Y-axis may be changed by manually entering the
minimum and maximum scale values.
1.
Tap the Sensor Operation Menu .
2.
Tap Graph Scale to display the dialog.
3.
Tap drop-down list. Select Custom.
4.
Tap the first value entry field (maximum) and enter the maximum scale
value.
5.
Tap the second value entry field (minimum) and enter the minimum scale
value.
6.
Tap the units drop-down list and select the appropriate value.
7.
Click OK.
Add Marker
1.
Tap the Sensor Operation Menu .
2.
Tap Add Marker.
When Add Marker is tapped, a marker is added at the center point of the graph
All markers are added at the center point of the graph, newly added markers will
be positioned directly "over" previous markers if the previous marker has not
moved from the center point. The value of the signal at the marker position may
be displayed in a list.
