background image

9

Limited Warranty

All products manufactured by Seller are warranted to be free from defects in 
material and workmanship for a period of one (1) year, unless otherwise 
specified, from date of shipment and to conform to applicable specifications, 
drawings, blueprints and/or samples. Seller’s sole obligation under these 
warranties shall be to issue credit, repair or replace any item or part thereof 
which is proved to be other than as warranted; no allowance shall be made for 
any labor charges of Buyer for replacement of parts, adjustment or repairs, or 
any other work, unless such charges are authorized in advance by Seller.

If Seller’s products are claimed to be defective in material or workmanship or 
not to conform to specifications, drawings, blueprints and/or samples, Seller 
shall, upon prompt notice thereof, either examine the products where they are 
located or issue shipping instructions for return to Seller (transportation-
charges prepaid by Buyer). In the event any of our products are proved to be 
other than as warranted, transportation costs (cheapest way) to and from 
Seller’s plant, will be borne by Seller and reimbursement or credit will be made 
for amounts so expended by Buyer. Every such claim for breach of these 
warranties shall be deemed to be waived by Buyer unless made in writing within 
ten (10) days from the date of discovery of the defect.

The above warranties shall not extend to any products or parts thereof which 
have been subjected to any misuse or neglect, damaged by accident, rendered 
defective by reason of improper installation or by the performance of repairs or 
alterations outside of our plant, and shall not apply to any goods or parts 
thereof furnished by Buyer or acquired from others at Buyer’s request and/or to 
Buyer’s specifications. Routine (regularly required) calibration is not covered 
under this limited warranty. In addition, Seller’s warranties do not extend to the 
failure of tubes, transistors, fuses and batteries, or to other equipment and 
parts manufactured by others except to the extent of the original 
manufacturer’s warranty to Seller.

The obligations under the foregoing warranties are limited to the precise terms 
thereof. These warranties provide exclusive remedies, expressly in lieu of all other 
remedies including claims for special or consequential damages. SELLER NEITHER 
MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER 
EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF 
MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME 
FOR SELLER ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH 
THE FOREGOING.

Summary of Contents for 8640A930-1




















Reviews: