1
1
2
ON
1
2
ON
ON
1 2
ON
1 2
ON
1 2
RF
Gate
3.2
75
44
121
24
106
50
121
23
106
22
Wireless dual channel signal transmission system for safety edges
Original operating instructions
General
1
Safety instructions
2
Common application
2.2 Industrial door
ENGLISH
370052A
05/18
Transmitter
Receiver
Warning:
Switch off the operating voltage before working on the
system. Only trained, qualified personnel may perform installation
and startup. The unit may only be repaired by the manufacturer. The
switching unit may only be used to protect against dangers on
crushing and shearing points and on automatic industrial doors and
gates (intended use). National and international regulations on
industrial door and gate safety must be complied with. Always
Transmitter
Contact
Receiver
Safety edge
Mobile safety edges
Receiver
Transmitter
Transmitter 1
Transmitter 2
DIP switch 2 OFF
Transmitter 2
Transmitter 1
Safety edge
8.2 kOhm
Contact
(e.g.wicket door)
consider the safety functions of your application as a whole, never just in
relation to one individual section of the system. The installer is responsible
for carrying out a risk assessment and installing the industrial door system
correctly.
i
Battery life up to 2 years, but it is recommended
batteries are changed every 12 months.
Receiver
Receiver
Safety edge
8.2 kOhm
not used
not used
Safety edge
8.2 kOhm
DIP switch 2 ON
2.1 Sliding gate
Transmitter input 1 corresponds to receiver output 1
Transmitter input 2 corresponds to receiver output 2
i
Transmitter 1 (input 1) corresponds to receiver output 1
Transmitter 2 (input 1) corresponds to receiver output 2
i
Further transmitters with separate manuals
Batteries
CR2032
Push
button
Push
button
