104
|
english
9 User interfaces
Warning
The product may be so hot that only the buttons should be touched to avoid
burns.
If the power supply is switched off, the settings will be stored.
9.1 Control panel
STOP
H
V
1
2
3
4
5
96202701_00
Folientastatur
Saver, ComBo
BA
CH-3110 Münsingen
Biral AG
Massstab
Zeichnungsnummer
1:1
I
II
Datum
Änd.Index
Visum
Ersetzt durch:
Ersatz für:
96202701
Änd.Index
Freigabe
geprüft
gezeichnet 10.04.2017
PDM_Nr
TD-0035026
00
ts
Pos. Description
1
Shows the operating status of the
individual pump.
2
Light fields for indication of setpoint.
3
Changes the setpoint and reset of
alarms and warnings.
4
Enables radio communication
5
Makes the pump ready for operation/
starts and stops the pump.
Start:
If the button is pressed when the
pump is stopped, the pump will only
start if no other functions with higher
priority have been enabled.
Stop:
If the button is pressed when the pump
is running, the pump will always be
stopped.
When the pump is stopped via this
button, the “Stop” text next to the
button will illuminate.
9.2 Setpoint setting
Set the desired setpoint by pressing or . The setpoint can be set on any of the pumps in
the system and applies to the complete booster system.
The light fields on the control panel will indicate the setpoint set.
LED is on
LED is off
