Biotek Synergy LX, User Manual

Page: 68 / 198

44 | Chapter 3 : Getting Started
filter cube is installed.
4. Place the microplate on the carrier and tap Start .
When the read is finished, the results are displayed (and automatically stored onboard).
Tap the screen to toggle through the available data sets. Tap
Output to send results to
the printer and/or USB flash drive.
Edit, Delete, or Copy a Protocol
The Synergy LX ships with several preprogrammed protocols. Depending on the
reader’s model, these protocols include Absorbance (BCA and Bradford), Fluorescence
(Red, Blue, and Green), Luminescence (Lum (unfiltered)), and the seven absorbance
Take3 protocols. These protocols can be edited and deleted.
Edit a Protocol
1. From the Main Menu, tap Protocol .
2. Tap the protocol that you want to modify, then tap Edit .
3. Make any desired changes, then tap Save .
Delete a Protocol
1. From the Main Menu, tap Protocol .
2. Tap the protocol you want to delete, then tap Delete .
Copy a Protocol
Copying an existing protocol and then editing it is one way to create a new protocol.
1. In the Main Menu, tap the protocol you want to copy, then tap Copy .
2. Enter a name for the copied protocol, and then tap Save .
3. Make any desired changes, then tap Save .
View or Output Results Stored on the Reader
1. In the Main Menu, tap Results , then select the protocol for which you want to view or
output results. The results are displayed on the touchscreen. Tap the screen to toggle
through the available data sets.
Synergy LX User Manual
1501000N Revision A BioTek Instruments, Inc.