Biotek Synergy H1, Operator'S Manual

Page: 38 / 190

6: Unpack and Inspect the Dispense Module
Applies only to models equipped with injectors
Save all packaging materials. If you need to ship the dispense module to
BioTek for repair or replacement, you must use the original materials.
Using other forms of commercially available packaging, or failing to
follow the repackaging instructions, may
void your warranty .
During the unpacking process, inspect the packaging, module, and
accessories for shipping damage. If the dispense module is damaged,
notify the carrier and your BioTek representative. Keep the shipping
boxes and the packaging materials for the carrier’s inspection. BioTek
will arrange for repair or replacement of your dispense module
immediately.
Refer to Figure 2-9 and Figure 2-10 starting on page 26 .
1. Open the shipping box. Remove the accessories box and the foam insert that contains
the injector tubing and bottle holders.
2. Lift out the module and place it on a level surface.
3. Open the accessories box and remove its contents. Refer to Package Contents
& Accessories on page 3 for the expected items.
4. Place all packaging materials into the shipping box for reuse if the dispense module
needs to be shipped.
12 | Chapter 2: Installation
BioTek Instruments, Inc.