Biotek MicroFlo select, Operator'S Manual

Page: 58 / 130

40 | Operation
BioTek Instruments, Inc.
Move Backward Through the Menus
To move to a previous menu, press the Previous Screen key.
Scroll Through Options
Certain functions, such as entering a program name or selecting a program, offer a set
of options from which to make a selection. To view the different options, press the
Options key or the Shift + Options key combination. Press the ENTER key to select
the current option.
Dispenser Run Menu
When using the MicroFlo’s keypad, from the main menu press the arrow key once
for this menu:
DISPENSER RUN MENU
Run Prime Purge

Top line
Second line
   
Softkeys
Press its SoftKey to select a menu option displayed in the second line of the display:
 Run: select this option to run one of the Protocols. Enter the protocol’s
number in the top line, or use the Options button to scroll through the list of
programs. Press Enter to select it and follow the prompts. The plate map and
dispense volume can be changed for the current run. Upon completion of the
run you can put another plate on the carrier and select Repeat. Or, select
New to change the parameters or select another program.

Prime : press and hold down the Softkey to prime the tubing. Fluid flows into
the prime trough for as long as you press the key.

Purge : press and hold down the Softkey to purge the tubing. Fluid is pumped
back into the supply vessel as long as you press the key.

 : press the Softkey under the arrow to move to the next menu: Dispenser
Action Menu .
Dispenser Action Menu
From the main menu press the arrow key one time for this menu:
DISPENSER ACTION MENU
Define Util Setup
Top line
Second line
   
Softkeys