Biotek ELx808, Operator'S Manual

Page: 42 / 172

20
| Chapter 2: Installation
3. Press Enter to advance to the SAMPLES ON COL RPT screen.
S A M P L E S O N C O L R P T ? N O
Y E S N O
4. Select YES to print samples on the column report, or NO to omit them.
5. Press Enter to advance to the PRINT CURVE-FIT screen.
P R I N T C U R V E - F I T ? N O
Y E S N O
6. The current selection is displayed on the top line of the screen. To change the
report option, select YES or NO . The display updates to reflect the selection.
(Select YES if there are quantitative assays defined on board and you wish to
print the curve.)
7. Press Enter to return to the Select Utility Option screen.
READ Options
1. At the Select Utility Option screen, press the soft key beneath READ to set up
Reader Prompt preferences. Select YES to prompt the operator to enter
identifications and sample counts before a microplate is read. The prompts are
shown below.
2. Press Enter after each selection to advance the display.
P R O M P T F O R P L A T E I D ? N O
Y E S N O
3. PROMPT FOR PLATE ID allows the user to enter an alphanumeric name of up
to 10 characters. Select
YES to present this prompt at run-time.
P R O M P T F O R S A M P L E I D ? N O
Y E S N O
4.
PROMPT FOR SAMPLE ID allows the user to identify samples with a
4-character alphanumeric name. The starting ID is entered and automatically
incremented by the software. Select
YES to present this prompt at run-time.
P R O M P T S A M P L E C O U N T ? N O
Y E S N O
BioTek Instruments, Inc.