Biotek ELx808, Operator'S Manual

Page: 41 / 172

9: Configure Reader Settings
|
19
5. To edit the Time, select TIME . At the Time Entry Screen, use the numeric keys to
enter the correct time.
6. Select a 12 - or 24-hour format by pressing the soft key beneath these options. The
display automatically updates with the new time AM/PM format.
7. Press the Previous Screen key to return to the Select Utility Option menu.
OUTPUT Options
1. At the Select Utility Option screen, select OUTPUT to set report output
preferences.
R E P O R T O U T P U T ? B O T H
P R I N T C O M P U T E R B O T H
2. Any previously defined selection appears on the top line of the display. Select
the desired option (PRINT, COMPUTER, BOTH) to change the output device.
3. Press Enter to advance to the Select Printer menu screen. If COMPUTER is
selected, all results will be transferred directly to the computer screen via the
RS232 serial port.
S E L E C T P R I N T E R E P S O N
E P S O N H P
REPORT Type
™
These selections only apply when the reader is run in standalone mode
(without Gen5). See Appendix A for examples of Reports.
1. At the Select Printer screen, press Enter to advance to the REPORT TYPE menu
screen.
R E P O R T T Y P E : M A T R I X
C O L U M N M A T R I X B O T H
2. The current selection appears on the top line of the display. Select the desired
option (COLUMN, MATRIX, BOTH) to change the Report Type.
ELx808 Operator’s Manual