Biotek ELx808, Operator'S Manual

Page: 39 / 172

8: Check/Adjust the Reader’s Filter Table
|
17
8: Check/Adjust the Reader’s Filter Table
After installing the filter wheel (or new filters), ensure that the ELx808’s filter table
accurately maps the physical location of the filters in the filter wheel.
1. Turn on the reader if it is not already on.
2. At the Main Menu screen, select UTIL .
R E A D Y 0 1 : 3 0 P M 1 0 / 0 9 / 1 0
R E A D D E F I N E R E P O R T U T I L
The SELECT UTILITY OPTION menu appears:
S E L E C T U T I L I T Y O P T I O N :
T E S T S S E T U P O U T P U T R E A D
3. From the Select Utility Option menu, select SETUP . The EDIT SETUP
INFORMATION screen appears:
E D I T S E T U P I N F O R M A T I O N :
D A T E T I M E F I L T E R * M O R E
4. Select FILTER . The wavelength currently defined for Filter #1 appears:
E N T E R
F I L T E R # 1 W A V E L E N G T H : 4 0 5
If you need to change the filter wavelength number, use the numeric keypad to
enter a number at the cursor location. To save the entry and move to the next
filter on the filter table, press the
Enter key. When the last filter has been
entered, the software exits the filter routine, and displays the following screen:
E D I T S E T U P I N F O R M A T I O N :
D A T E T I M E F I L T E R * M O R E
5. Press the Main Menu key to return to the Main Menu.
ELx808 Operator’s Manual