Biotechne ProteinSimple Peggy Sue User Manual Download Page 39

Page: 39 / 88

Starting a Run: Size-based Assays (Sally Sue and Peggy Sue)

page 35

Sally Sue and Peggy Sue User Guide

Place the assay plate into the sample tray.

Click

Start

Step 2 - Start the Run

You can start a run two ways depending on whether you want to run an assay using existing parameters or
set up a new assay.

To start a new run with an existing assay:

a. Select

File

in the main menu and click

Open Assay

b. A list of the last five assays opened will display. Select one of these assays or click

Browse

to open

the Assay folder and select a different one.

To start a run with a new assay:

a. Select

File

in the main menu, click

Open Assay

and select

Sally Sue Size

Peggy Sue Size

. From

the pop up window, select the

Assay Type

: Size, Total Protein Size or Charge (Peggy Sue only) and

the

Size Range

(Size or Total Protein Size assay types only): 2-40 kDa, 12-230 kDa or 66-440 kDa.

b. The

Start

button will display which means an assay is already loaded.

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands