© Biotage 2020
Quick Start Guide to TurboVap
®
LV | Page 1
For detailed instructions, see the TurboVap
®
User Manual.
Mode (1)
Display shows the current operation mode. Mode is controlled
by pressing the blue button. There are three evaporation modes
available on TurboVap LV:
»
Manual:
Evaporate until the user presses the
Stop
button.
»
Time:
Evaporate for a set period of time.
»
Method:
There are several options. For more information,
see “Define Methods” in the TurboVap
®
User Manual.
Evaporate
Settings
System Ready
12:13 Wed 22 Jan 2020
Start
Stop
Edit
Time
Mode
Nozzle Setup
1.2
L/min
L/min
0.0
54 min
Time
Status
Gas Flow
75
°
C
°
C
75
Bath Temp
54:00
Remaining (min:sec)
0:00
Elapsed (min:sec)
1
2
6
9
3
4
5
8
7
Time (2)
Display shows the set evaporation time in minutes for the
current evaporation method. Time is controlled by pressing the
blue button. (Only shown in Time mode.)
Gas Flow (3)
Display shows the current and set gas flow in L/min. Gas flow is
controlled by pressing the blue button.
Bath Temperature (4)
Display shows the current and set water bath temperature in °C
or °F. Bath temperature is controlled by pressing the blue button.
Nozzle Setup (5)
Display shows which nozzle rows are currently enabled.
Rows are selected ON or OFF by pressing the blue button.
Status (6)
Display shows the remaining and/or elapsed time of the
current evaporation.
Quick Start Guide to TurboVap
®
LV
Start/Pause (7)
Press to start or pause the evaporation in progress.
Stop (8)
Press to stop the evaporation in progress.
Settings (9)
Press to define system settings. Displays an alternative screen.
Evaporate
Settings
System Ready
16:48 Wed 22 Jan 2020
Manifold Setup
48 Positions
Sound Level
Medium
Sleep Mode
Edit
Temp Unit
°
C
Brightness
-
+
Change
Time & Date
16
48
:
2020
Jan
22
Bath Light
OFF
ON
More »
Lid Sleep
OFF
ON
Cont End-Point
OFF
ON
10
11
14
15
18
12
13
19
17
16
Sound Level (10)
Display shows the current sound level. Sound level is controlled
by pressing the blue button. The sound level can be set to Low,
Medium, High, or OFF.
Brightness (11)
Display shows the brightness of the touch screen. Brightness
is controlled by pressing either
+
or
–
.
Manifold Setup (12)
Display shows the selected/installed manifold. For more
information, see “Manifolds” in the TurboVap
®
User Manual.
Sleep Mode (13)
Display shows the sleep mode settings. For more information,
see “Sleep Mode and Automatic Wake-Up” in the TurboVap
®
User Manual.
Temp Unit (14)
Display shows the temperature unit used by the system.
Press
Change
to switch between °C or °F.
