TForce 945P BIOS Manual
Mode4.
On-chip Secondary PCI IDE
This item allows you to enable or disable the primary/ secondary IDE Channel.
The Choices: Enabled
(default), Disabled.
IDE Primary/Secondary/Master/Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by
the IDE hard drives in your system. As well, your operating
environment requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and your system
software both support Ultra DMA/100, select Auto to enable BIOS
support.
The Choices: Auto
(default), Disabled.
SATA Mode
T
his item allows you to choose SATA Mode.
The Choices: IDE
(default),RAID,AHCI.
On-Chip Serial ATA
This item allows you to choose:
Disabled:
disabled SATA Controller
Combined Mode:
PATA and SATA are combined max of 2 IDE drivers
in each channel.
Enhanced Mode:
enabled both SATA and PATA max of 6 IDE drivers
are supported.
SATA Only:
SATA is operating in legacy mode.
The Choices: Default
(default), Auto, Combined Mode, Enhanced Mode,
and SATA only.
SATA PORT Speed Settings
This item allows you to set SATA PORT Speed.
The Choices: Disabled
(default),Force GEN I, Force GEN II.
PATA IDE Mode
This item allows you to choose PATA IDE Mode.
The Choices: Primary
(default), Secondary.
20
