Biostar M7SXF Page 48 User Manual Download

Page: 48 / 73

Chapter 2

BIOS Setup

2-12

MPS Version Control For OS

The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select the version supported by the operation system running on this computer.

The Choices: 1.4

(default), 1.1.

OS Select For DRAM > 64MB

A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.

The Choices:

Non-OS2

(default), OS2.

HDD S.M.A.R.T. Capability

This item allows you to enable/disable open the S.M.A.R.T. quick function of the
hard disk.

The Choices: Disabled

(default), Enabled.

Report No FDD For WIN 95

Whether report no FDD for WIN 95 or not.

The Choices: No

(default), Yes.

Video BIOS Shadow

Determines whether video BIOS will be copied to RAM for faster execution.

Enabled

(default)

Optional ROM is enabled.

Disabled

Optional ROM is disabled.

Small Logo(EPA) Show

This item allows you to enable/disable display the small EPA logo.

The Choices: Disabled

(default), Enabled.

Summary of Contents for M7SXF










































































Search results

Summary of Contents for M7SXF

Reviews:

Related manuals for M7SXF

Brands by name

Popular brands

Biostar M7SXF, User Manual

Search results

Summary of Contents for M7SXF

Reviews:

Related manuals for M7SXF

Brands by name

Popular brands