K8VBK-S7 BIOS Setup
40
9 Voltage Control
!
Figure 9. Frequency/ Voltage Control
9.1 AUTO DETECT PCI CLK
This item allows you to enable / disable auto Detect PCI Clock.
The Choices: Enabled
(default), Disabled.
9.2 SPREAD SPECTRUM
This item allows you to enable\disable the spread spectrum function.
The choices:
Enabled
(default), Disabled.
9.3 CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON”
status. All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.
It’s strongly recommended to set CPU Vcore and clock in default
setting. If the CPU Vcore and clock are not in default setting, it may
cause CPU or M/B damage.
9.4 CPU Voltage Regulator
This item allows you to select CPU Voltage Control.
The Choices: Default
(default)
