Biostar 6100 AM2 Setup Manual Download Page 81

Page: 81 / 132

GeForce 6100 AM2 BIOS Setup

OnChip USB

This option should be enabled if your system has a USB installed on the system
board. You may need to disable this feature if you add a higher performance
controller.

The Choices: V1.1+V2.0

(default), Disabled, V1.1

USB Memory Type

The Choices: Base Memory<640k>

(default).

USB Keyboard Support

This item allows you to enable or disable the USB Keyboard Legacy Support.
Enabled

Enable USB Keyboard Support.

Disabled

(default)

Disable USB Keyboard Support.

USB Mouse Support

This item allows you to enable or disable the USB Mouse Legacy Support.
Enabled Enable USB Mouse Support.

Disabled

(default) Disable

USB

Mouse

Support.

AC97 Audio

This item allows you to enable or disable to support AC97 Audio.

The Choices: Auto

(default), Disabled.

MAC LAN

This option allows you to control the onboard MAC LAN.

The Choices: Auto

(default), Disabled.

Onboard LAN Boot ROM

This item allows you to enable or disable the Onboard LAN Boot ROM.

The Choices: Disabled

(default), Enabled.

Summary of Contents for 6100 AM2





































































































































Search results

Summary of Contents for 6100 AM2

Reviews:

Biostar 6100 AM2, Setup Manual, Page: 81 / 132

Search results

Summary of Contents for 6100 AM2

Reviews: