GeForce 6100 AM2 BIOS Setup
20
On-chip IDE Channel 0/1
The motherboard chipset contains a PCI IDE interface with support for two IDE
channels. Select “Enabled” to activate the first and/or second IDE interface.
Select “Disabled” to deactivate an interface if you are going to install a primary
and/or secondary add-in IDE interface.
The Choices: Enabled
(default), Disabled.
IDE Primary/Secondary/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for
each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4
will increase performance progressively. In Auto mode, the system automatically
determines the best mode for each device.
The Choices: Auto
(default), Mode0, Mode1, Mode2, Mode3, Mode4.
IDE Primary/Secondary/Master/Slave UDMA
Ultra DMA function can be implemented if it is supported by the IDE hard drives
in your system. As well, your operating environment requires a DMA driver
(Windows 95 or OSR2may need a third party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA, select Auto to enable
BIOS support.
The Choices: Auto
(default), Disabled.
IDE DMA Transfer Access
This item allows you to enable or disable the IDE DMA transfer access.
The Choices: Enabled
(default), Disabled.
Serial-ATA Controller
The Choices: All Enabled
(default).