manualshive.com logo in svg

Biostar 6100 AM2, Setup Manual, Page: 62 / 132

Share
Download
Biostar 6100 AM2 Setup Manual Download Page 62

GeForce 6100 AM2 BIOS Setup 

 

4

Standard CMOS Features 

This submenu contains industry standard configurable options. 

Advanced BIOS Features 

This submenu allows you to configure advanced features of the BIOS. 

Advanced Chipset Features 

This submenu allows you to configure special chipset features. 

Integrated Peripherals 

This submenu allows you to configure certain IDE hard drive options and 
Programmed Input/ Output features. 

Power Management Setup 

This submenu allows you to configure the power management features. 

PnP/PCI Configurations 

This submenu allows you to configure certain “Plug and Play” and PCI options. 

PC Health Status 

This submenu allows you to monitor the hardware of your system.   

Frequency/ Voltage Control 

This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.   
(However, we suggest you to use the default setting. Changing the voltage and 
clock improperly may damage the CPU or M/B!) 

Summary of Contents for 6100 AM2





































































































































Reviews:

No comments