1915P-A7 BIOS Manual
25
6.1.5 Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices:
Enabled,
Disabled
(default).
6.1.6 USB KB Wake-Up From S3
This item allows you to enable or disabled USB keyboard wake up
from S3.
The Choices: Disabled
(Default), Enabled.
6.1.7 Resume by Alarm
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled,
Choose the Date and Time.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose shat hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
6.1.8 POWER ON Function
This item allows you to choose the power on function.
The Choices: Button
(default), Password, Hot Key, Mouse Left,
Mouse Right, Any Key, Keyboard 98.
6.1.9 KB POWER ON Password
Input password and press Enter to set the Keyboard power on
password.
6.1.10 Hot Key Power ON
Input password and press Enter to set the Keyboard power on
password.
The Choices: Ctrl-F1
(default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5,
Ctrl-F6, Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12.
6.1.11 POWER After PWR-Fail
This setting specifies whether your system will reboot after a power
fail or interrupts occurs.
Off
Leaves the computer in the power off state.
On Reboots the computer.
Former-Sts Restores the system to the status before power failure or
interrupt occurs.
The Choices: Off
(default), On, Former-Sts.