1915P-A7 BIOS Manual
19
5.1.5 On-chip Secondary PCI IDE
This item allows you to enable or disable the primary/ secondary IDEChannel.
The Choices: Enabled
(Default), Disabled.
5.1.6 IDE Primary/Secondary/Master/Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by
the IDE hard drives in your system. As well, your operating
environment requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and your system
software both support Ultra DMA/100, select Auto to enable BIOS
support.
The Choices: Auto
(default), Disabled.
5.1.7 On-Chip Serial ATA Setting
This item allows you to choose:
Disabled:
disabled SATA Controller
Auto:
auto arrange by BIOS.
Combined Mode:
PATA and SATA are combined max of 2 IDE drivers
in each channel.
Enhanced Mode:
enabled both SATA and PATA max of 6 IDE drivers
are supported.
SATA Only:
SATA is operating in legacy mode.
The Choices: Default
(default), Auto, Combined Mode, Enhanced
Mode, and SATA only.