BioSmart DC Infrared Blanket
©2015 BioSmart® Technologies
- 11 -
Using the Remote Control
Depending on individual need, the temperature
ranges from level 1-10. The LCD screen will show
“01” as level one, “02” as level two, and so on up to
the highest level 10, along with a heat icon flash.
Press “
▲
” once to increase heat level by one.
Press “
▼
” once to decrease heat level by one.
Each time the press is effective, the controller box
will beep once and the indicator will flash once.
L
R
Timer setting: Press timer setting button
A) When press the first time, the LCD will display
the initial time 16 hours.
B) Then by pressing the timer setting button each
time, you can decrease duration by one hour. The
initial usage duration is 16 hours.0 hour means
timer setting has been turned off and the time iron
will be off. During the time setting operation, the
LCD will display 16-00, which means 16-0 hours,
along with a time icon flash. Each time the press is
effective, the controller box will beep once and the
indicator will flash once.
L
R
When any button is pressed, the LCD screen will light up indicating the
current status of the blanket. If the infrared heating symbol does not
appear on the LCD screen, it means that the blanket is off. Set the new
heat duration time and press the "On/Off" button to activate the blanket.
The heat icon will reappear.
If heating duration is set, the electric blanket will shut off automatically
after the duration has been reached. If the duration is not set, the blanket
is in stand-by mode and the heat will not come on. To turn the blanket off
prior to the end of the duration time, simply push the "On/Off" button.
