23
®
Ironhand
To use Ironhand
To shut down Ironhand
5.4
Press and hold the
on/off
button on the remote control for approximately
1 second to place Ironhand in stand-by mode, press and hold for 6 seconds to
shut down Ironhand.
Quick stop
5.4.1
Figure 20: Quick stop.
If the Ironhand on/off button does not respond, pull the red stop handle on
the remote control. This releases the grip and shuts down the system quickly.
To reset the quick stop, press the red handle to its normal position.
To change settings in Ironhand
5.5
To adjust the force level
5.5.1
You can increase or decrease the grasp force with the plus and minus buttons
on the remote control.
·
Press the plus button to increase the grasp force.
·
Press the minus button to decrease the grasp force.
The four blue force level indicators on the remote control show which force
level you have chosen, see section
