Page 5 of 21
1.5
Site Preparation
This machine is intended to be used in a controlled laboratory environment. Please refer to the
figure below for proper installation of the machine. The machine has one ventilation opening in
the rear. A 15 inches clearance is recommended between the back of the machine and the wall.
Figure 1: Dimensions of the Perfusion Apparatus 5
1.6
Unpacking Instructions
Remove the top 2 pieces of blue foam and the items that are located on top of the
machine. Then, carefully remove the foam that surrounds the machine.
It is suggested that the machine be removed from the box by two people, one on
each side. To lift the Perfusion Apparatus, place your hands underneath the
machine and remember to bend at the knee. Please, keep the box and all the foam
pieces in storage, in case the machine needs to be shipped in the future.
1.7
Packing List
The following items are included with the purchase of a Perfusion Apparatus:
Qty
Reference
Description
1
PER-05-115
Perfusion Apparatus
1
PER05-TUBHC-01
Disposable Perfusion Tubing Set with Coil (Sterile)
1
PERTRAY-MABS-01
Disposable Perfusion Tray (Sterile)
1
TC-02
Biorep Thermoprobe
1
86610610
Medical-Rated Power Cord
1
PER05-UM
User Manual
1
PER05-DAQ
CD with Software & User Manuals
15 Inches