USER MANUAL
TD064-O&M-001
REVISION 4
Page 20 of 38
This screen displays the chamber
during the dwell phase.
This screen displays the chamber
during the aeration phase.
4.2.3
Confirmation of End of Cycle
At the end of Aeration the display will
prompt the Operator to check the
Hydrogen Peroxide concentration in the
chamber.
Press “OK?”
The concentration can be checked from either side using an independent low level
sensor through one of the test points. It is recommended that this check is done
on a regular basis. Alternatively a hand held sensor can be used to check the
levels directly within the chamber after opening the door.
