12
The menu includes three operation mode icons. To select the mode you turn the
encoder right/left for searching the needed mode and then press the encoder button.
, house heating,
, parallel pumps,
, Hot Water Supply priority.
3 USER MENU
To enter the user menu when you are on the main screen, (Picture 4) press the
encoder button. User menu will pop up on the screen (Picture 6):
Hot Water Supply temperature – Hot Water Supply
parameter setting menu, item 3.4.
Operation Mode – boiler operation mode selection, item 3.5.
PID mode setting – used for setting up boiler operation
parameters during combustion process. Here you can set up
parameters of time and breaks between fuel supply as well as
fan capacity, operation time for the internal screw.
Forced operation – this function is used for switching the
burner from firing mode to operation mode. It can be used only
for forced transition to operation.
Firing/Flameout – used for starting the burner operation
mode. When burner is operating – for switching off. Icon will
turn to
.
Service menu – entry according to the code. Contains other
menus. Menu is open after entering digital code.
Manual operation – used for checking up all the connected
boiler mechanical parts.
