NIBP250 User’s Guide
Page 18 of 18
www.biopac.com
8. Maintenance and Care
8.1. Service Policy
The display unit of the NIBP250 does not require any routine maintenance. Should service be required, it should
be performed by a qualified technician. All maintenance and repair procedures should be directed to BIOPAC.
To obtain information on or order repair parts, contact BIOPAC
BIOPAC Systems, Inc.
42 Aero Camino, Goleta, CA 93117
Telephone: 805-685-0066
Facsimile: 805-685-0067
E-mail:
Web: www.biopac.com
For authorization and instructions for repair service, contact your local Field Service Representative. Provide the
following information:
Your Name
Unit Serial Number
Your Institution
Sensor Size
Address
Describe the problem
Telephone Number
Facsimile Number
E-mail Address
You will be advised of the corrective action to take.
8.2. Cleaning Procedures
Warning: Do not sterilize the sensor by autoclaving (steaming), irradiation or ethylene oxide (ETO). Do not soak
sensor or any part of the NIBP250 system in any solution or water.
8.2.1. Monitor & Sensor Housing Cleaning Procedures
The monitor and sensor may be cleaned on an as-needed basis. To clean the monitor and sensor dampen a cloth
with a commercial, nonabrasive cleaner and wipe the surfaces lightly. Always apply the solution to the cloth, not
directly to the monitor and sensor. Do not immerse any part of the NIBP250 system.
Rev. 06.07.2013