12. Reassemble, fill with water, add BioOx Natural Media, and start up.
TROUBLESHOOTING FOR THE BIOOX CLEAN AIR
SYSTEM
PREPARING FOR AN EXTENDED LEAVE
When leaving for a few days: disconnect pump and fan from electricity (turn off).
When not in use for a week or longer: disconnect fan and pump from electricity and drain out water from the
reservoir.
When not in use for several months: disconnect from electricity and drain out water from reservoir. Clean unit and
allow to dry. You can store the BioOx Clean Air System for years in this manner. When ready to use, refill with water,
add BioOx Natural Media and startup.
BioOx Reactor 85
of
14
15
10. Loosen debris accumulation in water box with
brush. (It is best to remove debris into drain or
garbage so that it does not re- clog the openings
on the water box.
11. Rinse reservoir with water and drain debris.
If water flow slows or ceases OR if water consumption decreases to almost nothing: check for a malfunctioning
pump or for clogged openings on the water circulation tray. This indicates that the unit needs cleaning.
To check if the pump is working:
1. Unplug the water pump and the fan from electrical outlet.
2. Lift off fan assembly.
3. Plug water pump in and look into water box to see if water is flowing.
Summary of Contents for Reactor 300
Page 2: ...BioOx Reactor 85 of 2 15 ...
